Bimetal Thermostat, T90, AMT-90,AMT-P1 AMT-P2

Langir Electric Co.,Ltd.

Capillary Thermostat | Bimetal Thermostat | Snap-Action Thermostat

Bimetal Thermostat

Langir
KST401/ KST401P, T90

KST401/ KST401P, T90 Informations

    Applicable to be used as the function of temperature adjustment and control for the warm-air machine, water heater, milk-heater, electric cooker, electric iron, electric heater.
    Technical Parameters
  • Designed temperature: 0~90℃
  • Temperature control range: 6~30℃ 6-35℃ 5-55℃ 0-70℃ 5-75℃ etc.
  • Current: 16A
  • Voltage: 250V AC
  • Temperature Control Precision: ±3℃
  • Life: 100,000 Cycles
  • Leakage Current: 0.5mA

AMT-90

AMT-90

    Features of Structure:
  • Quickly respond to the variation of temperature, and has the function of automatic reset.
  • No current flows through bimetallic strip so the influence of self-heating effect is avoided and it leads to a long service life with little change in temperature.
  • Environmental friendly high-power silver contact is adopted, being accord with the demands of safety approval for export.
  • Applies imported environmental friendly material which is approved by SGS test.
    Direction for Use
  • The product is applicable to the thermal radiation control on various electric heating appliances including electric hairdryers, electric heaters, warm air blowers, dehumidifiers, stewpots, etc.
  • Never touch wire protector or temperature sensor during the installment and utilization of thermal protectors, or it will lead to the failure of protectors because of inaccurate temperature and loose contact.
    Technical Parameters
  • Switch Type: Normally Closed
  • Operating Voltage and Current: AC250V/10A AC125V/16A
  • Operating Temperature: 50-150 (one step for every 5℃)
  • Standard Tolerance: ±5℃
  • Reset Temperature: Operating temperature decrease by 15-45℃
  • Contact Closure Resistance: =50mΩ
  • Insulation Resistance: =100MΩ
  • Life: 10000 times

Configuration & Dimension Configuration & Dimension Configuration & Dimension
Configuration & Dimension Configuration & Dimension Configuration & Dimension
Configuration & Dimension Configuration & Dimension Configuration & Dimension
1. terminal 2. long rivet 3. base 4. bimetal 5. spring piece 6. short rivet 7. static piece 8. active contact 9. static contact
AMT-P1

AMT-P1

    Features of Structure:
  • Quickly respond to the variation of temperature, and has the function of automatic reset
  • No current flows through bimetallic strip so the influence of self-heating effect is avoided and it leads to a long service life with little change in temperature.
  • Environmental friendly high-power silver contact is adopted, being accord with the demands of safety approval for export.
  • Applies imported environmental friendly material which is approved by SGS test.
    Direction for Use
  • The product is applicable to the thermal radiation control on various electric heating appliances including electric hairdryers, electric heaters, warm air blowers, dehumidifiers, stewpots, etc.
  • Never touch wire protector or temperature sensor during the installment and utilization of thermal protectors, or it will lead to the failure of protectors because of inaccurate temperature and loose contact.
    Technical Parameters
  • Switch Type: Normally Closed
  • Operating Voltage and Current: AC250V/10A AC125V/16A
  • Operating Temperature: 50-150 (one step for every 5℃)
  • Standard Tolerance: ±5℃
  • Reset Temperature: Operating temperature decrease by 15-45℃
  • Contact Closure Resistance: ≤50mΩ
  • Insulation Resistance: ≥100MΩ
  • Life: 10000 times

Configuration & Dimension Configuration & Dimension Configuration & Dimension
Configuration & Dimension Configuration & Dimension Configuration & Dimension
Configuration & Dimension Configuration & Dimension Configuration & Dimension
1. terminal 2. base 3. long rivet 4. PTC 5. press piece 6. terminal 7. spring piece 8. bimetal 9. short rivet 10. static piece 11. active contact 12. static contact
AMT-P2

AMT-P2

    Features of Structure:
  • Quickly respond to the variation of temperature.
  • No current flows through bimetallic strip so the influence of self-heating effect is avoided and it leads to a long service life with little change in temperature.
  • Environmental friendly high-power silver contact is adopted, being accord with the requirements of safety approval for export.
  • PTC component and contact circuit form a parallel circuit. With the heading up of temperature, contact circuit is off and current flows through PTC component to form a loop. The temperature of PTC component increases rapidly, being higher than rated reset temperature and keeping the circuit in the off state. When the general power is off and temperature decreases to the reset temperature of bimetallic strip, the strip recovers rapidly and contact closes, providing a safer and more reliable protection on circuits.
  • Installment with bracket is available, being easy for direct fixing.
    Direction for Use
  • The product is applicable to the thermal radiation control on various electric heating appliances including electric heaters, warm air blowers, dehumidifiers, etc.
  • Never touch wire protector or temperature sensor during the installment and utilization of thermal protectors, or it will lead to the failure of protectors because of inaccurate temperature and loose contact.
    Technical Parameters
  • Switch Type: Normally Closed
  • Operating Voltage and Current: AC250V/10A AC125V/16A
  • Operating Temperature: 50-150 (one step for every 5℃)
  • Standard Tolerance: ±5℃
  • Reset Temperature: Operating temperature decrease by 15-45℃
  • Contact Closure Resistance: ≤50mΩ
  • Insulation Resistance: ≥100MΩ
  • Life: 10000 times

Configuration & Dimension Configuration & Dimension Configuration & Dimension
Configuration & Dimension Configuration & Dimension Configuration & Dimension
Configuration & Dimension Configuration & Dimension Configuration & Dimension
1.terminal 2.base 3.long rivet 4.PTC 5.press piece 6.terminal 7.spring piece 8.bimetal 9.short rivet 10.static piece 11.active contact 12.static contact
Recommend Product
Capillary ThermostatCapillary Thermostat The volume of the material in the temperature sensing part of temperature controller will inflate or deflate when the temperature of the controlled object varies, which causes the film box that is connected to the temperature sensing part inflating or deflating, then drives the switch on or off through a leverage function to keep a constant temperature. WK Series Liquid Inflated Temperature Controller is characterized by accurate temperature control, reliable, small on/off temperatures difference, a wide range of temperature control and large over loaded current etc. Snap-Action ThermostatSnap-Action ThermostatKSD series is a Small-sized bimetal thermostat with a metal cap,which belongs to thermal relays family .The main principle is that one function of bimetal discs is snap action under the change of sensing temperature, The snap action of disc push the action of the contacts through the inside structure, then caused on or off the circuit finally,It's can be used different insulating materials to satisfy the customers' request ,the main insulator is bakelite, PPS and ceramics etc. It is a small type temperature controller. And it has fixed temperature property, don't need to adjust,reliable action, long life and little wireless interference.
Bimetal ThermostatBimetal Thermostat Applicable to be used as the function of temperature adjustment and control for the warm-air machine, water heater, milk-heater, electric cooker, electric iron, electric heater.
Designed temperature: 0~90℃
Temp. control range: 6~30℃ 6-35℃ 5-55℃ 0-70℃ 5-75℃
Voltage and current: AC250V 16A
Thermal ProtectorThermal Protector This thermostat is rectangle,small size,regular act-temperature,the action rapid,reliable,unelectric-arc,and longevity. It can install at narrow position or set in some products.
The Series use the bimetal as the component of feel-temperature, when the temperature change, the bimetal change the shape so the contact-point act quickly, thereby the electric circuit break off.
Kettle ThermostatKettle ThermostatSuitable for temperature control of electric kettle
The bimetal piece has high quality and acumen
The insulated plastic material could be ensured high temperature Steam automatic skip protection and dry burn prevent protection for safer use Reasonable configuration and easy assemble, wide range temperature, long life.
Approval: TUV SEMKO CQC RoHS
Twinkling ThermostatTwinkling ThermostatTwinkling thermostat can be installes and fixed on the heating body or shelf through rivets or aluminum board.Through conduction and radiation ,it can sense the temperature.The installing position is free,and it has fine temperature controlling result and little magnetic interference.The compensation temperature controller can control the temperature and minish the fluctuation of temperature through absorbing self heat. It is widely used for biscuit machine, stove,rice cooker,fried pan,roasted pan,electric iron,heating machin etc.
Capillary Thermostat, Bimetal Thermostat, Kettle Thermostat, Thermal Protector, Twinkling Thermostat, Snap Action Thermostat
© Langir Electric Co.,Ltd. Tel: 86-577-62737672 Fax: 86-577-62737671 E-mail: sunshine@sunshinele.com
www.sunshinele.com | www.emc-cable-gland.com | www.bimetal-thermostat.com | www.capillary-thermostat.com | www.snap-action-thermostat.com | www.kettle-thermostat.com